SA Classic Mini Forum
Thumz MKIII 4AGE build - Printable Version

+- SA Classic Mini Forum (https://samini.co.za)
+-- Forum: You and Your Mini (https://samini.co.za/forumdisplay.php?fid=1)
+--- Forum: Your Classic Minis Story (https://samini.co.za/forumdisplay.php?fid=3)
+--- Thread: Thumz MKIII 4AGE build (/showthread.php?tid=444)

Pages: 1 2 3 4 5

RE: Thumz MKIII 4AGE build - Jared Mk3 - 06-27-2016

As Dom said - don't bother with rear disc brakes.

RE: Thumz MKIII 4AGE build - Vinay-RS - 06-28-2016

Wouldn't rear disc brakes also require a complete modification of the handbrake setup?

RE: Thumz MKIII 4AGE build - Thumz - 06-28-2016

I would assume so Vinay, when doing the brakes though I'd need a complete new system from master, to lines and drums/discs itself, anyone know where i may get new hubs? as the stock ones are obviously 4x101.6 PCD not a big issue though would increase the range of rims i can choose. That will come in time maybe around August, the aim is to have her road ready for December.

RE: Thumz MKIII 4AGE build - DomMINIque - 06-28-2016

So it depends what your end plans are but this to me would seems probably like the best bet from what I see as your thought pattern.

Put golf/toyota disks on the front.
Leave the mini stuff on the back.
You'll have to go 13" wheels.

If you want to go 4x100 then get yourself some adapter plates (which you'll need for the rear anyways otherwise the rear wheels will be much further in compared to the front due to the disk setup.

That's about as far as my knowledge goes.

Why would you need a complete new system?

RE: Thumz MKIII 4AGE build - Thumz - 06-28-2016

Whilst removing the engine noticed a few kinks in the brake lines, which obviously isn't good, when i bought it the brakes weren't working, so drove from honeydew to midrand using my gears and a bit of luck at the robots. I'm also looking at it as a performance car and safety as well.

RE: Thumz MKIII 4AGE build - DomMINIque - 06-28-2016

Have new lines made up.
You'll probably find that the brake cylinders have seized hence the brakes not working, that's the case with my car.

You'll need to just wait for someone to come along and give you some more info on using the std mini master cylinder (with/without a booster) in conjunction with the golf/toyota conversion.

RE: Thumz MKIII 4AGE build - Willy - 06-28-2016

Safe yourself the trouble and don't go for rear brakes. Ask me its a crap job.

RE: Thumz MKIII 4AGE build - Thumz - 08-30-2016

So after a long time away I thought I'll post a few pics to just update the build, been a very busy time for me however not so much for the mini, got the engine out with gearbox, next few steps will be the disc brake upgrade subframe change and rust removal (in no order), would probably need to do the rust removal first though because my stands are currently placed on the subframe due to the floor been rusted through as shown in the pictures.

question, would it be beneficial to just patch the floor or remove the entire floor plate and replace it? also any takers on a complete 850cc motor and gearbox, have no idea what its worth but I am hoping that its sale will contribute to the very expensive subframe.

[Image: 49C1EB21-5E77-4818-B211-7D2C4436E9B2_zpsehxsyo8f.jpg]

[Image: DE6B4C7C-889F-4498-A162-B9DA40648E21_zps82sodsgp.jpg]

[Image: 6C7583C4-E564-4026-843B-3C31755B9B2D_zpsrgrekghm.jpg]

[Image: E80C2C2D-4751-4BAF-8870-B83F9DDC6394_zps3bwv0jvf.jpg]

[Image: AB347354-78F9-47FA-B1FE-206FB060BAFD_zpszwuqaxao.jpg]

[Image: 225676CE-9CF9-442A-B4E0-8F5E75AD0376_zpsrmgrbhyn.jpg]

RE: Thumz MKIII 4AGE build - Sean1380 - 08-31-2016

scrape the sound deadening off to see how bad the metal is.

RE: Thumz MKIII 4AGE build - Jared Mk3 - 08-31-2016

Agree with Sean. Use a heatgun and get that stuff off the floors so you can decide properly.