+- SA Classic Mini Forum (https://samini.co.za)
+-- Forum: Technical Stuff (https://samini.co.za/forumdisplay.php?fid=14)
+--- Forum: Technical Queries / Questions - Classic Mini (https://samini.co.za/forumdisplay.php?fid=15)
+--- Thread: GTS Rev counter wiring (/showthread.php?tid=436)
GTS Rev counter wiring - GTSPhil - 05-31-2016
Hi Guys
I have a GTS cluster that has a newish printed circuit, yet this did not solve my rev counter problem. The rev counter is not working at all.
I am using an electronic ignition kit (Accuspark).
I am using the white wire with the black tracer from the negative on the coil to the back of the rev counter.
Then from the voltage stabilizer on the B connector (I think) a wire is run to the spade connector on the back of the rev counter.
The rev counter is the RCV type 12 volt negative earth.
Any ideas or proper wiring/ diagram will be highly appreciated.
Thanks
RE: GTS Rev counter wiring - u09521 - 06-01-2016
According to this wiring diagram (Its the same tacho connection for all the diagrams with voltage stabilizer) you should connect direct to a 12v line.
I had endless problems with accuspark and aftermarket tacho, which were eventually solved by putting a 'floating earth' on the w/b input line, but its unlikely you will need this with an original unit