UV resistant acrylic rubberising compound

[Esteban]

Hi, I am going to use this and would apreciate any input:
1) Selfcoat Metal treat - R125/1L
2) Selfcoat rubber gaurd - R180/1L or R630/5L

http://www.selfcoat.co.za/selfcoat-rubbe...paint.aspx

Features

• A UV resistant acrylic rubberising compound.
  
• The coating can be applied up to 6 mm thick
  
• Provides excellent corrosion protection and a good non-skid surface
  
• Has excellent abrasion resistance in moderate applications such as trailers, bakkies and chassis
  
• Provides good sound damping properties on vibrating equipment
  
• Materials are water based and non-toxic
  
• No noxious fumes during painting and no need for solvents
  
• Supplied ready for application and does not require thinning, in fact the product should not be thinned.
  
• Clean up is conducted with water
  
• Multiple coats can be applied in the same day if higher dry film thicknesses are required
  
• Not recommended for use on substrates permanently submerged in water
  

Technical 

• Colour - Black and a limited range of colours
  
• Vehicle type -Acrylic
  
• Solvent - Water
  
• Thinner -Must not be thinned
  
• Specific gravity -1.1
  
• % Solids by mass -56.00%
  
• Fire index (SABS 0177-111) -Class 3
  
• Finish -Textured matt
  
• Pigments -Rubber, organic pigments
  
• Cleaner -Water
  
• Flash point -Waterborne not flammable
  
• Viscosity -Semi paste consistency
  
• % Solids by volume -59 % min
  
• Spreading rate -2 – 4 m²/L
  
• Shelf life -1 Year +
  

[Jared Mk3]

Where are you wanting to use it?

[Esteban]

Anywhere and everywhere on the mini as it comes in multiple colours!

But now there seems to be a price difference between the "distributors" and there is the R250 delivery charge.
So I think I will go Plascon as they are available at builders warehouse:
1) Metal rust converter & primer - EMS 21
2) Rust remover - RCC 120
3) Aquasolv degreaser - GR1
4) Bakkie & trailer coating - BTC 3