Hi, I am going to use this and would apreciate any input:
1) Selfcoat Metal treat - R125/1L
2) Selfcoat rubber gaurd - R180/1L or R630/5L
http://www.selfcoat.co.za/selfcoat-rubbe...paint.aspx
Features
1) Selfcoat Metal treat - R125/1L
2) Selfcoat rubber gaurd - R180/1L or R630/5L
http://www.selfcoat.co.za/selfcoat-rubbe...paint.aspx
Features
- A UV resistant acrylic rubberising compound.
- The coating can be applied up to 6 mm thick
- Provides excellent corrosion protection and a good non-skid surface
- Has excellent abrasion resistance in moderate applications such as trailers, bakkies and chassis
- Provides good sound damping properties on vibrating equipment
- Materials are water based and non-toxic
- No noxious fumes during painting and no need for solvents
- Supplied ready for application and does not require thinning, in fact the product should not be thinned.
- Clean up is conducted with water
- Multiple coats can be applied in the same day if higher dry film thicknesses are required
- Not recommended for use on substrates permanently submerged in water
- Colour - Black and a limited range of colours
- Vehicle type -Acrylic
- Solvent - Water
- Thinner -Must not be thinned
- Specific gravity -1.1
- % Solids by mass -56.00%
- Fire index (SABS 0177-111) -Class 3
- Finish -Textured matt
- Pigments -Rubber, organic pigments
- Cleaner -Water
- Flash point -Waterborne not flammable
- Viscosity -Semi paste consistency
- % Solids by volume -59 % min
- Spreading rate -2 – 4 m²/L
- Shelf life -1 Year +