1100 bulletproof..

[DomMINIque]

Some not much of an update today but got a little bit done. 

Wanted to sort out the brake lines so that I can connect the back to the splitter that goes to the front.

The splitter for the black mini. The idea is to take the brake line from the bottom of this line and join it to what's on the blue subframe.



Couldn't get the thing loose without bending the line so had to make a plan to limit movement. 



Got it loose.



Now the blue one. Wanted the lines from the subframe and brake cylinder to to join the loose line of the black mini (above)



Couldn't get the top piece off so opted to loosen the bottom so that I could strip everything and piece back together what I wanted



It was all going well when I saw the break fluid starting to escape. And then this happened...





Due to the rust between the pipe and nut, the nut would not turn freely and hence the pipe twisted and broke. I did manage to get it out though



Got the one t piece stripped into its different parts



Tying to take apart the other t piece but the nut was so badly stripped I had to resort to this