I was a busy boy this Sunday past...
I decided to fit my modified Mini Fin rear drums, and discovered, that the wheel studs dont push far enough out to allow me to bolt on my wheels !!!!!
So, luckily i had a set of longer wheel studs that i bought at some stage...
![[Image: DSC_2442_zpsksex5fbc.jpg]](http://i56.photobucket.com/albums/g169/wolfhound68/DSC_2442_zpsksex5fbc.jpg)
.
This meant removing the rear hubs, which also meant i may as well remove the old grease, clean the bearings in thinners and repack with fresh Castrol BNS grease.
This is the difference the longer studs made compared to the standard GTS rear studs.
I decided to fit my modified Mini Fin rear drums, and discovered, that the wheel studs dont push far enough out to allow me to bolt on my wheels !!!!!
So, luckily i had a set of longer wheel studs that i bought at some stage...
![[Image: DSC_2442_zpsksex5fbc.jpg]](http://i56.photobucket.com/albums/g169/wolfhound68/DSC_2442_zpsksex5fbc.jpg)
![[Image: DSC_2447_zps0fcvu33c.jpg]](http://i56.photobucket.com/albums/g169/wolfhound68/DSC_2447_zps0fcvu33c.jpg)
This meant removing the rear hubs, which also meant i may as well remove the old grease, clean the bearings in thinners and repack with fresh Castrol BNS grease.
This is the difference the longer studs made compared to the standard GTS rear studs.
![[Image: DSC_2446_zpsm9m5zhph.jpg]](http://i56.photobucket.com/albums/g169/wolfhound68/DSC_2446_zpsm9m5zhph.jpg)