07-05-2018, 07:05 AM
On with the build then...
I had to make a plan to fit the GTS correct carb linkage as it is very irritating having to work with two spanners to tighten a standard cable holder. I ended up making a threaded rod fitted with two nuts on one end and bent 180 deg on the other end.
The number plate holders was next up.
The 3-clock cluster was fitted with new blade bulbs and was mounted again.
Still struggling to get all the cluster lights to work, but just some connections that need help.
Lastly connected the choke cable to the carbs after fitting the needed grommet for the firewall.
I had to make a plan to fit the GTS correct carb linkage as it is very irritating having to work with two spanners to tighten a standard cable holder. I ended up making a threaded rod fitted with two nuts on one end and bent 180 deg on the other end.
The number plate holders was next up.
The 3-clock cluster was fitted with new blade bulbs and was mounted again.
Still struggling to get all the cluster lights to work, but just some connections that need help.
Lastly connected the choke cable to the carbs after fitting the needed grommet for the firewall.
Own some minis, break them, fix them, improve them, test them to the limit....
![[-]](https://samini.co.za/images/collapse.png)