Panelvan build

[DomMINIque]

Sooper prepare yourself as they aren't cheap.
But yea SCC has/can order. Dez has/can order.

Phil here as well and I'm sure Doug would too

[GTSPhil]

Yep the floor pans is not the problem having them welded in is the story.

Then the one day the bracket on the firewall for the top engine mount broke out, so it was replaced with a bit of angle iron.

   

New rear door rubbers and clips was sourced from the UK.

   


Very recently I acquired a set of 5 x 10 inch mistral mags.

   

---

After getting tired of not knowing what the temp is of the engine, I sourced a mech temp gauge.
Only problem the A+ engine gets its temp from the radiator so I drilled and tapped the head to take the gauge probe.

   

My dash cards to better utilize the dash.  I know the old glue and muck must be removed and then the top dash must be resprayed.

   


My rocker cover was kept original for the sake of the Cooper sticker, recently I sanded it down and re-sprayed it.


   

The final result.