Posts: 185
Threads: 11
Likes Received: 20 in 17 posts
Likes Given: 13
Joined: Aug 2015
Reputation:
4
Hi. The pressure plate is behind the flywheel and has three points that protrude through the flywheel. These three points mount to the flywheel via three tabs. Actually 6. Three doubles. The bolts with the stepped shoulder go through the diaphragm spring and bolts through the retaining plates to the pressure plate. The other ends of the retaining plates bolt to the flywheel. Hope this helps.
Try to download a copy of a workshop manual. There are some copies floating around on the webs.
•
Posts: 10
Threads: 2
Likes Received: 0 in 0 posts
Likes Given: 4
Joined: Apr 2016
Reputation:
0
08-10-2016, 07:49 PM
(This post was last modified: 08-10-2016, 08:04 PM by Gerald.)
Thanks. Ill check my bolts. And c if i can get it rite. 3 bolts is also longer then the other 3
Oh and i got a hayens manual but dont show what im looking for...
Ok i understand now. Looks like im taking of the flywheel agian. I did not bolt it onto the flywheel.
If you have pics to show me that wil be plus point
•
Posts: 185
Threads: 11
Likes Received: 20 in 17 posts
Likes Given: 13
Joined: Aug 2015
Reputation:
4
You don't need to take off the flywheel. The tabs bolt onto the flywheel from the front. The one end of the tabs bolt to the flywheel directly. the other end bolts through diaphragm spring, through the two tabs, to the pressure plate end that sticks through the flywheel. There are three bolts with a very pronounced smooth shoulder. Use these for bolting through the diaphragm. The standard bolts for bolting to the flywheel.
•
Posts: 10
Threads: 2
Likes Received: 0 in 0 posts
Likes Given: 4
Joined: Apr 2016
Reputation:
0
Thank you. Ill let you know if i come rite
•
Posts: 10
Threads: 2
Likes Received: 0 in 0 posts
Likes Given: 4
Joined: Apr 2016
Reputation:
0
So i removed the flywheel because crank seal leaking badly. Saw clutch plate can go in only one way. One side is flat,other side is long. Witch way should the long end of clutch plate face.
•
Posts: 90
Threads: 11
Likes Received: 10 in 4 posts
Likes Given: 0
Joined: Aug 2015
Reputation:
0
"long" end faces the engine, "flat" end faces the flywheel
•
Posts: 10
Threads: 2
Likes Received: 0 in 0 posts
Likes Given: 4
Joined: Apr 2016
Reputation:
0
Thanks. Another thing i saw today. I opened my tapped cover and there where rust particuls on the tapped bolts. But its not stuck,it just wipes of easy. Any idea what can cause that. Mini was standing for about 2 years before i bought it.?
•
Posts: 90
Threads: 11
Likes Received: 10 in 4 posts
Likes Given: 0
Joined: Aug 2015
Reputation:
0
Maybe it was standing with no oil filler cap?
•
Posts: 10
Threads: 2
Likes Received: 0 in 0 posts
Likes Given: 4
Joined: Apr 2016
Reputation:
0
Dont know but it dont look seriuos. This baby gonna ride in the next week. Then its of to spray painting. Cant wait to start on that
•