Just acquired a set of these wheels :



Let's see what you have.

I need to source a conversion kit for older models

Attached Files

Thumbnail(s)
   

Hi, I am going to use this and would apreciate any input:
1) Selfcoat Metal treat - R125/1L
2) Selfcoat rubber gaurd - R180/1L or R630/5L

http://www.selfcoat.co.za/selfcoat-rubbe...paint.aspx

Features

• A UV resistant acrylic rubberising compound.
  
• The coating can be applied up to 6 mm thick
  
• Provides excellent corrosion protection and a good non-skid surface
  
• Has excellent abrasion resistance in moderate applications such as trailers, bakkies and chassis
  
• Provides good sound damping properties on vibrating equipment
  
• Materials are water based and non-toxic
  
• No noxious fumes during painting and no need for solvents
  
• Supplied ready for application and does not require thinning, in fact the product should not be thinned.
  
• Clean up is conducted with water
  
• Multiple coats can be applied in the same day if higher dry film thicknesses are required
  
• Not recommended for use on substrates permanently submerged in water
  

• Colour - Black and a limited range of colours
  
• Vehicle type -Acrylic
  
• Solvent - Water
  
• Thinner -Must not be thinned
  
• Specific gravity -1.1
  
• % Solids by mass -56.00%
  
• Fire index (SABS 0177-111) -Class 3
  
• Finish -Textured matt
  
• Pigments -Rubber, organic pigments
  
• Cleaner -Water
  
• Flash point -Waterborne not flammable
  
• Viscosity -Semi paste consistency
  
• % Solids by volume -59 % min
  
• Spreading rate -2 – 4 m²/L
  
• Shelf life -1 Year +
  

I need a jack that has a vertical sill slot or R550.

Attached Files

Thumbnail(s)
   

Hi Everyone,

New here and to the world of Classic Mini's - used to be a slave to a Classic Alfa....
Just picked up a new 1275E, my wife is rather suspicious of how much joy this will bring to her life ....
not planning a Garage Queen - No offense to people who restore and enjoy that aspect of classic cars

   

There is a fair amount of work to be done, but from the bit of browsing i've done on the forum there be a lot of info and knowledge here!

regards,
Paul.

Hi everyone, my name is Dewald. I have a Wolseley mini that I got from my late grandfather. I want to restore it in its original state. Any help will be greatly appreciated. Thank you that I can be part of the mini family.

Hi All

I've just purchased a 1970 Mini Mk3 (Sedan) so am probably going to be asking loads of questions on the forum.

Thanks in advance

Regards
Clinton

We fetched an old Mini yesterday, that we are going to start rebuilding from scratch. 
The Mini was standing for a very long time and was badly neglected, so it will be a lot of time and effort to get everything stripped, and fixed up, but I am planning to share the whole build over here, and encourage some help and advice or suggestions along the way.

I will try and upload a couple of photos to start of with.


           

Hi everyone.

My dad and I have just laid our hands on a very neglected mini, and we are planning to start a complete rebuild.

We are hoping to push on the buttons of some knowledgeable members here to steer us in the right directions!

Thanks in advance  

Henk

Howzit guys, Im looking for a set of vents like the one below.

anyone have a spares set they willing to let go.

In JHB